[AARA] Ham Items For Sale

[Herman Campbell]

*Note:  These are from three different people:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
For Sale*

KT 36XA $300.00 Pick up only in Lafayette, LA. Partially disassembled, 
Pix available.  About 20 years old working good before
wind tore up the rotor and broke the feed line. Cash or USPS money order 
on pickup. Trades considered? Need Meter movement
for Bird 43, 250C 100-250 Mhz Bird element, Mirage B-5018-G 2 meter 160 
watt amp., Other stuff considered, what you got!

Mirage DB-35 Dual Band Handheld Amplifier for sale. 5 watt input. 
$125.00 shipped con USA. Trades for Bird meter movement for
43 wattmeter, Bird 250C 100-250 Mhz element. MFJ 451 cw keyboard keyer. 
Offers considered! Checked out on 146 Mhz works good.
Excellent physical shape 9 of 10 condition. NO Paypal USPS money order 
or good check ship when check clears.

Wanted good operating MFJ-451 keyboard keyer. Do not need keyboard only 
the keyer. Send price and condition shipped to 70508

Need Element clip and thumb screw to hold spare elements to side of the 
Bird 43 watt meter. Managed to loose one set while
refurbishing a Bird 43. Any help appreciated. Thanks!

John O. Allen, N0JA
129 Patricia Ann Pl
Lafayette, LA 70508
573-470-0358
n0ja54 at yahoo.com
<Mailto:n0ja54 at yahoo.com>
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*Trailer For Sale**
*
The trailer is based upon a 6x12 landscape trailer with leveling jacks 
incorporated. On that sits the 10 meter telescoping
mast weighing 350 lbs and the steel framed, aluminum sided 6’x6’ 
operating enclosure.  I have no specifications on the
mast other than is it extremely heavy and rugged. The sections are 
constructed of stainless steel tube and are raised by a
large acme screw within the mast. The screw is driven by a chain and 
sprocket assembly at the base of the mast which is
turned by a ¾ hp 120V motor. The operating enclosure incorporates a 6’ 
operating desk, 4 Heliax bulkhead feedthus,
220V and 120V power interfaces and distribution, Ethernet and additional 
RF feedthrus. There is a rugged 2”x2” mounting
point welded to the enclosure frame on the roof top for additional 
antenna etc.

The overhaul in 2021 consisted of inspection and greasing of axle 
bearings, new tires, butyl taped seams and new rubberized
roof coating, resealing of aluminum siding joints, refinished floor with 
marine grade epoxy paint. Telescoping mast drive screw
was greased and new rotor mount fabricated and installed. All trailer 
lighting was inspected and operational. The trailer performed
flawlessly on the FN57/66 2021 trip. Less than 1000 miles were put on it 
during that trip.  It has been kept under a tarp for most
of the time since.

Included in the sale is the trailer, mast and mountings, and the 
enclosure with interfaces as described. In addition, a spare tire
for the trailer, one 7/8” and one ½” Heliax feedlines are included. Not 
included are any antennas, rotors, communications equipment,
ancillary equipment or tow vehicles shown in the pictures. I have in 
hand the title for the trailer.
Trailer is located in Southern NH FN42ir

Link to Trailer photos: Rover trailer 
https://www.dropbox.com/sh/b7xb5sjql9x6kd4/AAB7Fq0uOv-Scd9UUmoSrlnIa?dl=0

Asking $6,250. This is a fraction of what it would take to recreate this 
today.
Please PM me with any questions.
Thanks for looking.  73

*JOHN SWINIARSKI K1OR*
k1or at comcast.net

------------------------------------------------------------------------------------------------------------------------------------------------

FYI
Contact K5EWS directly if interested.
de Skip W5GAI
------------------------
 From the estate of my friend W4WJ:

1.       Elecraft K3 SN 1317 with 2nd receiver, Antenna tuner, filters 2.8
kHz, 1.8 kHz. 400 Hz, 250 Hz, 6 kHz in primary receiver, while 2nd
receiver contains 2.8 kHz, 1.8 kHz, 400 Hz and 200 kHz.   Has multiple
options and complete documentation

2.       Elecraft P3 SN 2953 with Elecraft Directional Coupler and P3SVGA

3.       Meticulous  documentation of K3 and P3 with copy of the Fred Cady,
KE7X, The Elecraft K3, Design, Configuration and Operation, 2nd edition

4.       Asking $ 2,250 pickup in Fredericksburg, Texas   will bring to
Belton April 15,2023

5.       Antenna KT 34 with the M2 upgrade on the ground  in Fredericksburg
Asking $ 750

Contact Jim Lindley K5EWS for more information:
cell phone 512-917-2267,
k5ews at arrl.net

---------------------------------------------------------------------------------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.w5ddl.org/pipermail/aaraclubemaillist_w5ddl.org/attachments/20230411/f572e701/attachment.htm>